EcoCube 11 Room ventilation system

• 1 x blow-out
• 2 x 90° elbows
• 30m piping
• 9 x nipple
• 14 x intake grates
• Jet nozzles
• Manifold air changes
• Air recirculation
• Warm air mixing

TEKA EcoCubes can be used for almost any application in the field of filtration of smokes and dusts.
Via a pipeline system (not included), the polluted air is extracted by the fan and guided to the filters. Here, the particulate contaminants are filtered on the surface of the filter cartridge.
The filter cartridges are automatically cleaned by compressed air at the required intervals. The adhesive particles on the cartridges  dissolve by the blast of compressed air and get into a dust collector. The cleaned air is led back into the working area without any heat loss. The EcoCube can be used as a central extraction system at multiple  manual welding stations, as suction for welding robots/cabins and a suction system for exhaust hoods.
You get a fully operational system incl. the control for the fan. Only the current supply must be applied. The main components of the EcoCube are a fan with pneumatic and integrated controls, filter section incl. cartridges and dust collection section.
The housing is made of a stable steel construction and powder coated inside and outside. The individual sections are equipped with service doors, in order to perform an optimal and quick maintenance.
The control unit is supplied completely adjusted.
This control unit is developed specifically for the monitoring and control of the filter system. The EcoCube is fitted with filter cartridges for dust class M according to DIN EN: 60335-2-69 of 2008.

• Fully automatic dedusting via POWER-SPRAY-System
• 4 large-sized cartridge filters with nano-fibers, 1.200 mm each
• Rollable dust container with snap closures
• SIEMENS S7 Control
• Maintenance doors for all control areas
• Spark trap dia. 250 mm or 400 mm